LTN has done it again! The designers at LTN has designed a dynamic FX chase kit for the CAN AM Spyder RT. This Chase kit has single color and multicolor modes with over 200 preset chase patterns. The strips are tinted and less noticeable during the day with outstanding glow at night. And that’s not all! Shock and amaze spectators as your entire bike flashes, strobes, and chases to the beat of your music. All of these dynamic functions are already built into our kits and requires no additional hardware or funding.
(1) 8 to 1 split a box with 3 foot Power and ground cords with in line fuse
(1) Toggle Switch
(2) 6 foot 12 AWG ground cords with female connectors on one end.
(1) Bluetooth receiver with remote
(1) 1ft chase LED strip with 2ft cord (1/2 Left Side Front Scoop)
(1) 1ft chase LED strip with 4ft cord (1/4 Right side Front Scoop)
(1) 1ft chase LED strip with 2ft cord (1/2 Left upper Control Arm)
(1) 1ft chase LED strip with 3ft cord (1/3 Left Lower Control Arm)
(1) 1ft chase LED strip with 3ft cord (1/3 Right upper Control Arm)
(1) 1ft chase LED strip with 4ft cord (1/4 Right lower Control Arm)
(2) 1ft chase LED strips with 2ft cords (1/2 Chase Eyes)
(1) 4ft chase LED strip with 2ft cord (4/2 Left side hood light)
(1) 4ft chase LED strip with 4ft cord (4/4 Right side Hood Lights)
(1) 1ft chase LED strip with 2ft cord (1/2 Left side lower Panel)
(1) 1ft chase LED strip with 3ft cord (1/3 Right Side Lower Panel)
(2) 2ft chase strips 6ft cords (2/6 Rear Bags)
(2) 4ft chase strips 2ft cords (Underbody)
(8) 2 to 1 Y connector
(2) 1ft foot extension cords
(2) 2 foot extension cords
(1Q) 2019 and Below Black Strip Can Am RT Chase Kit
*Note Lite The Nite LEDs has labeled each individual light strip based on installation location. All cords are precisely measured to give a clean and neat appearance to your professional install.